Sandblast Hose Couplings
Sandblast Hose Couplings
Sandblast hose couplings are a quick connect or nozzle-threaded hose coupling designed specifically for sandblast hose applications. The quick connect is interchangeable between all hose sizes.
The quick coupling head is not interchangeable with Chicago universal type couplings.
The nozzle thread coupling is 1-1/4” NPS thread on all hose sizes
The sandblast hose coupling is designed to slip over the outside of the hose and lock in place using supplied screws. See below for hose outside diameter range. Do not use on hose that is not designed for this coupling type or does not fall into the range.
Threaded inlet couplings are quick connect adapters to connect to your equipment or piping.
110 PSI at 70 Deg F
Hose outside diameters:
3/4” ID is designed for a 1.50” OD hose
1” ID is designed for a 1-7/8” OD hose
1-1/4” ID is designed for a 2-5/32 OD hose
1-1/2” ID is designed for a 2-3/8 OD hose
A 1-1/4” ID lightweight hose is available in some brands that utilizes a 1 inch coupling. As long as the OD matches, it is compatible with the 1 inch couplings offered on this page.
Install screws offset by 180 degrees to ensure centering, then return to the first screw and repeat to ensure tightness.
Replacement gaskets in urethane or black nitrile are available (black nitrile is provided standard with each quick coupling
For sandblast hose please visit our parent company website at Capitalrubber.com
WARNING: Cancer and reproductive harm: www.P65Warnings.ca.gov