Center Punch Clamp Tool
Center Punch Clamp Tool
The center punch hose clamp tool is used to apply preformed center punch style hose clamps. First insert the tail of the preformed hose clamp into the tool, then crank the tool to cinch the clamp down tight against the hose. The punch clamp is designed to permanently seal when the punch on the tool is hit against the hose clamp's buckle. Then roll the clamp tool upward to break free from the hose clamp. The tail end of the hose clamp can then be removed from the tool and recycled.
Clamp pressure is not measured in this system. Test the hose and monitor during use to ensure proper tension.
Click for compatible center punch type clamps. Not for use with bulk band and buckle, roll-over style, or open-ended clamps
F40 Crank Tool is a smaller model, recommended for hose inside diameters 1.5" and smaller
For replacement parts see parts breakdown on PDF and email for pricing
When installing multiple clamps on the same hose coupling, rotate each clamp by 90 degrees so that the clamp buckles are not aligned.
WARNING: Cancer and reproductive harm: www.P65Warnings.ca.gov
Click for a printable instructional PDF and parts breakdown
